The dust bag should be installed as such
Release time:
2022-11-25 11:13
【Abstract】:
Dust removal bag is a consumption part of dust removal equipment, which needs to be replaced after 1-3 years of operation when it is blocked or damaged.
Dust removal bag is a consumption part of dust removal equipment, which needs to be replaced after 1-3 years of operation when it is blocked or damaged.
The following is to share the precautions and installation methods in the process of replacement.
3 points for attention in changing dust bag:
1. First, cut off the main power supply and control power supply of the dust removal device. Both overall power off, do not live operation. Do not close the door for manned operation.
2. Cool down and ventilate before replacing some non-ordinary dust filter bags. For some special dust ventilation time is extended or equipped with testing instruments, until the dust concentration is reduced to a safe concentration before entering. Do not operate blindly.
3. Masks, gloves, safety hats and safety belts should be equipped during the replacement process. Labor protection needs to be matched.
Installation method:
1. Cut off the power supply to release the compressed air in the air storage tank.
2. Remove the blow pipe of the ash cleaning system.
3. Put the dust removal skeleton out.
4. Remove the dust cloth bag and use a screwdriver during the removal.
5. Load into new dust filter bag.
The following to share the dust bag installation figure:
Summary: The installation of dust bag must find professional and technical personnel, installation in strict accordance with the operating procedures, do not carry out the operation of non-professional personnel.
Welcome to pay attention to me, regularly to share with you the use of bag dust collector, maintenance, repair knowledge.
Contact number: 13396910416 (wechat same number)