PRODUCTS
Milter dust filter bag
Category:
Milter dust filter bag
Summary:
The mite needle felt is designed to overcome the shrinkage phenomenon of ordinary polyester needle felt for over 130 -170. The new filter felt has a working temperature of 150 degrees C, which avoids the waste caused by using high temperature filter material under certain working conditions.
Key word:
Description
【Milter dust filter bag】
Details of the introduction
The mite needle felt is designed to overcome the shrinkage phenomenon of ordinary polyester needle felt for over 130 -170. The new filter felt has a working temperature of 150 degrees C, which avoids the waste caused by using high temperature filter material under certain working conditions.
Processing postprocessing: high temperature setting, singeing and calendering, water and oil repellent, anti-static, PTFE coating, emulsion, surface coating
This filter features: the filter material of high strength, good elasticity, fabric size stability, good abrasion resistance, high porosity, good air permeability, long service life, good dedusting effect, at room temperature (lower than 170 DEG C) under mechanical properties and good resistance to acid and alkali.
Attention point
1. this material should be used in the absence of corrosive conditions.
2. avoid the use of high temperature alkaline conditions;
3. attention should be paid to eliminating the influence of static electricity.
4. the fire source and the heat source are isolated.
Bag style: external interface, one round flange
Bag: hot melt, seam
Bag tail: the bottom of the circle, the bottom of the ellipse, the bottom of the new bag
* style sizes can be customized in accordance with needs
Application areas:
Widely used in: steel, cement, chemical, power generation, smelting, building materials, pharmaceutical, grain, food, processing, casting and other industries.
Performance parameter table of mitt's needle filter felt
Product Model |
HZFF-MT-800 |
|||
Sample Patch |
Fiber Material |
Polyester Staple |
||
Scrim |
Fiber Glass Scrim |
|||
Thickness |
mm |
≥2.1 |
||
Unit Weight |
g/m2 |
≥750 |
||
Air Permeability |
L/(dm2*min) |
150—180 |
||
Tensile Strength |
MD(N) |
≥ |
1600 |
|
CD(N) |
≥ |
1500 |
||
Break Elongation |
MD(%) |
< |
10 |
|
CD(%) |
< |
10 |
||
Working Temp |
Continuous |
150 |
||
Peak |
170 |
|||
Chemical Properties |
Acid-resistant |
Moderate |
||
Alkali-resistant |
Bad |
|||
Oxidation-resistant |
Good |
|||
Hydrolysis-resistant |
Bad |
|||
Ultraviolet resistant |
Good |
|||
Finishing |
Heat Setting |
Singe |
Calendar |
Chemical Coating |
Water proof and Oil proof |
PTFE Lamination |
|||
Products with desired unit weight, thickness, and finishing styles can be provided according to customers’ requirements. |
Previous page
None
Next page